D-23 Irons Key Features

arias-d23-all-x04

For additional pictures with a look from above of every D-23 iron club, please visit our Facebook page.

You can customize your lengths, lofts, lies, swing weight, shaft selection and grips in the pricing section.

D-23 IRONS4i5i6i7i8i9iPWTOLERANCE
LOFT°222630343842460 *
LIE°61.56262.56363.56464.250 *
ONSET mm0.50.50.50.50.50.511
OFFSET mmZEROZEROZEROZEROZEROZEROZERO1
BOUNCE°2234.56781
WEIGHT (g)247 **254 **261 **268 **275 ** 282 **285 ****
TOE HEIGHT52mm53mm54mm55mm55.5mm56mm56.5mm-
BLADE LENGTH80 mm80 mm80 mm80 mm80 mm80 mm80 mm-
HOSEL PORTYESYESYESYESYESYESYES-
BENDABLE°5 ***5 ***5 ***5 ***5 ***5 ***5 ***-
E PLATEDYESYESYESYESYESYESYES-
TOPLINE mm6.26.26.26.26.26.26.2-
SOLE WIDTH19.1 mm19.5 mm19.8 mm20.1 mm20.4 mm20.6 mm21 mm-
BORE DEPTH30 mm30 mm30 mm30 mm30 mm30 mm30 mm-
BORE DIAMETER355" or 370"355" or 370"355" or 370"355" or 370"355" or 370"355" or 370"355" or 370"-
* All lofts and lies adjusted to spec.
 ** Head weights can be adjusted heavier up to 12g per head through the hosel weight port.
*** Both our D-23 irons and M-29 wedges can be bent up to 5°, however only by arias golf under warranty.

  • Easiest irons to align at the target on the market.
  • Available in both 355" taper tip and parallel 370".
  • Classic no offset look at address reminiscent of past generation's most iconic iron designs.
  • True zero offset period, and actually, just a little bit of onset.
  • Full cavity back, midsize blade length, blade height and sole width , make these irons very forgiving on off center hits, suitable for golfers of all levels.
  • Modern friendly sole grind with beveled leading and trailing edge makes this iron easy to play both from the fairway and the rough.
  • 431ss with proprietary heat treatment.
  • Outstanding ball speed and smash factor for a non HI COR design.
  • Guaranteed super solid yet soft feel, in fact in our testing, many golfers preferred our D-23 irons over some of the highest rated forged irons on the market today.
  • We designed our D-23 irons with a little more hosel length, this provides more bending points on the hosel.
  • Standard lofts combined with four degree gaps allows most golfers a fighting chance at getting ten yards between each club. At no extra charge we will customize your lofts and lies to your liking.